plastic injection moulding machine, injection moulding machine wanted, injection molding plastics machines

SAVE YOUR MONEY ::..  SAVE YOUR TIME ::.. CHOOSE::..  PROVEN, QUALITY MACHINES::.. WE GUARANTEE OUR MACHINES ::..

Plastic Injection Molding Machine

"You Will Be Satisfied With The PERFORMANCE And PRICE Of Our Proven Quality plastic injection molding machine.

We Guarantee Our Proven Quality plastic injection molding machine.

Please, Check Details Of Our Proven Quality Machines, If You Couldn't Find What You Need, Please Contact Us About What Kind Of Machines You Need.

We Will  Help You."

Contact form

     

Ekin 90-110

Injection Molding Machines

 

Item Properties 

Machine type

Ekin 90(800-110)
Clamping Unit
Clamping force 800 Kn, Mould oppening stroke 280 mm, Minumum mould height 60mm, Maximum mould height 350mm, Overall size of Plates 480X520X135mm, Distance between tiebars 290X290 mm, Hydraulic ejector stroke 80mm, Ejection force 29Kn
Injection Unit
Screw Diameter 30(A)35(B)38(C)mm, L/D ratio 25(A) 20(B) 20(C), Injection pressure 2192(A)1560(B)1304(C)bar, Shot weights in(PS) 98(A)134(B)158(C)g, Screw stroke 140mm, Plasticizing capacity 31(A)37(B)40(C)g/s, Heating capacity 5Kw
Heating Zones 2+1set
2+1set
Nozzle holding force
300Kn
General Data
Electric motor power:9Kw, Instaled total electrical rating 14Kw, Oil tank capacity 150,8 l, Machine dimensions 3600X1385X800cm, Net weight 2450kg
 

 

Ekin 600

Injection Molding Machines

 

Item Properties

Machine type
Ekin 600 (6000-3500)


Clamping Unit
Clamping force 6000 kn, Mould oppening stroke 540mm, Minumum mould height 140mm, Maximum mould height 630mm, Overall size of Plates 800X600X170mm, Distance between tiebars 570X510 mm, Hydraulic ejector stroke 135mm, Ejection force 70Kn

Injection Unit
Screw Diameter 50(A)60(B)65(C)mm, L/D ratio 20(A) 19(B) 18(C), Injection pressure 1978(A)1662(B)1416(C)bar, Shot weights in(PS) 569(A)677(B)795(C)g, Screw stroke 240mm, Plasticizing capacity 58(A)63(B)69(C)g/s, Heating capacity 11Kw

Heating Zones
3+1set

Nozzle holding force
40Kn

General Data
Electric motor power:22Kw, Instaled total electrical rating 33Kw, Oil tank capacity 337,5 l, Machine dimensions 6050X1080X1200cm, Net weight 7250

 

 

Ekin 350

Injection Molding Machines

 

Machine Type
350(3500-1200)

Clamping Unit
Clamping force 3500 Kn, Mould oppening stroke 620mm, Minumum mould height 200mm, Maximum mould height 800mm, Overall size of Plates 1030X990X250mm, Distance between tiebars 570X620 mm, Hydraulic ejector stroke 160mm, Ejection force 83Kn

Injection Unit
Screw Diameter 65(A)70(B)75(C)mm, L/D ratio 21(A) 19(B) 18(C), Injection pressure 1775(A)1530(B)1410(C)bar, Shot weights in(PS) 993(A)1152(B)1308(C)g, Screw stroke 300mm, Plasticizing capacity 69(A)75(B)83(C)g/s, Heating capacity 13Kw

Heating Zones
4+1set

Nozzle holding force
50Kn

General Data
Electric motor power:30-37Kw, Instaled total electrical rating 43/50Kw, Oil tank capacity 469 l, Machine dimensions 7800X1910X1370cm, Net weight 13400kg

 

 

Ekin 150-250

Injection Molding Machines

Item Properties

Machine type
Ekin 150(1500-250)

Clamping Unit
Clamping force 1500 Kn,Mould oppening stroke 320mm,Minumum mould height 100mm,Maximum mould height 400mm ,Overall size of Plates 550X635X145mm ,Distance between tiebars 340X340 mm ,Hydraulic ejector stroke 100mm,Ejection force 43Kn

Injection Unit
Screw Diameter 40(A)45(B)50(C)mm,L/D ratio 20(A) 19(B) 18(C),Injection pressure 2244(A)1773(B)1436(C)bar,Shot weights in(PS) 283(A)301(B)372(C)g,Screw stroke 190mm, Plasticizing capacity 42(A)45(B)54(C)g/s,Heating capacity 7Kw

Heating Zones
3+1set

Nozzle holding force
35Kn

General Data
Electric motor power:11/15Kw,Instaled total electrical rating 18/22Kw,Oil tank capacity 217 l ,Machine dimensions 4350X1600X830cm,Net weight 3700kg

 

Ekin 240-600

Injection Molding Machine

Item Properties

Machine type
Ekin 240(2400-600)

Clamping Unit
Clamping force 2400 kn, Mould oppening stroke 540mm, Minumum mould height 140mm, Maximum mould height 630mm, Overall size of Plates 800X600X170mm, Distance between tiebars 510X510 mm, Hydraulic ejector stroke 135mm, Ejection force 70Kn

Injection Unit
Screw Diameter 50(A)60(B)65(C)mm, L/D ratio 20(A) 19(B) 18(C), Injection pressure 1978(A)1662(B)1416(C)bar, Shot weights in(PS) 569(A)677(B)795(C)g, Screw stroke 240mm, Plasticizing capacity 58(A)63(B)69(C)g/s, Heating capacity 11Kw

Heating Zones
3+1set

Nozzle holding force
40Kn

General Data
Electric motor power:22Kw, Instaled total electrical rating 33Kw, Oil tank capacity 337,5 l, Machine dimensions 6050X1080X1200cm, Net weight 7250kg


 

 

Ekin 190

Injection Molding Machine

Item Properties

Machine type
Ekin 190(1900-400)

Clamping Unit
Clamping force 1900 kn, Mould oppening stroke 400mm, Minumum mould height 120mm, Maximum mould height 500mm, Overall size of Plates 630X730X150mm, Distance between tiebars 410X410 mm, Hydraulic ejector stroke 110mm, Ejection force 50Kn

Injection Unit
Screw Diameter 45(A)50(B)55(C)mm, L/D ratio 22,2(A) 20(B) 18,2(C), Injection pressure 2213(A)1792(B)1481(C)bar, Shot weights in(PS) 333(A)411(B)498(C)g, Screw stroke 210mm, Plasticizing capacity 45(A)54(B)58(C)g/s, Heating capacity 9Kw

Heating Zones

3+1set

Nozzle holding force
35Kn

General Data
Electric motor power:15/18,5Kw, Instaled total electrical rating 24/27,5Kw, Oil tank capacity 281 l, Machine dimensions 5100X1650X965cm, Net weight 4850
 

 

Ekin 480

Injection Molding Machine

Item Properties

Machine type
Ekin 480(4800-2000)

Clamping Unit
Clamping force 4800 kn, Mould oppening stroke 730mm, Minumum mould height 230mm, Maximum mould height 900mm, Overall size of Plates 1200X1240X300mm, Distance between tiebars 520X680, Hydraulic ejector stroke 200, Ejection force 88Kn

Injection Unit
Screw Diameter 80(A)85(B)90(C)mm, L/D ratio 21(A) 20(B) 19(C), Injection pressure 1838(A)1628(B)1452(C)bar, Shot weights in(PS) 1806(A)2039(B)2286(C)g, Screw stroke 360mm, Plasticizing capacity 85(A)90(B)96(C)g/s, Heating capacity 16Kw

Heating Zones
4+1set

Nozzle holding force
57Kn

General Data
Electric motor power:37Kw, Instaled total electrical rating 53Kw, Oil tank capacity 623 l, Machine dimensions 8700X2120X1580cm, Net weight 17200kg

 

Ekin 800

Injection Molding Machine

Item Properties

Makine type
Ekin 800(8000-5000)

Clamping Unit
Clamping force 6000 kn, Mould oppening stroke 540mm, Minumum mould height 140mm, Maximum mould height 630mm, Overall size of Plates 800X600X170mm, Distance between tiebars 570X510 mm, Hydraulic ejector stroke 135mm, Enjection force 70Kn

Injection Unit
Screw Diameter 50(A)60(B)65(C)mm, L/D ratio 20(A) 19(B) 18(C), Injection pressure 1978(A)1662(B)1416(C)bar, Shot weights in(PS) 569(A)677(B)795(C)g, Screw stroke 240mm, Plasticizing capacity 58(A)63(B)69(C)g/s, Heating capacity 11Kw

Heating Zones
3+1set

Nozzle holding force 40Kn
40Kn

General Data
Electric motor power:22Kw, Instaled total electrical rating 33Kw, Oil tank capacity 337,5 l, Machine dimensions 6050X1080X1200cm, Net weight 7250





 

AND LOTS OF GOOD PROPERTIES, for more information  please  do not hasitate to contact us

 

 PLASTIC PROCESSING MACHINERY IN TURKEY

The domestic production of basic plastic raw materials has naturally resulted in a strong plastic processing industry.

Turkey manufactures all kinds of plastic products, ranging from the traditional to the most recently developed plasticproducts, such as plastic construction and irrigation products, plastic autoparts, plastic table and kitchenware, allplastic parts of electronic, electrical and household items and all kinds of plastic packing products.

Petkim- Petrokimya Holding A.S., which is a public owned company, is the major plastic raw material manufacturer.

Petkim produces basic plastic raw materials such as polyethylene (PE), polypropylene (PP), polystyrene (PS) and polyvinyl chloride (PVC), high density polyethylene (HDPE), low density polyethylene (LDPE), olefins, fiber intermediates, masterbatches and aromatics. Petkim has two petrochemical plants; one is in Yarimca- Kocaeli and the other one is in Aliaga-Izmir. However the Yarimca plant has been taken over by Tupras which is the major producer of petroleum products in Turkey. In 2000, the total gross production of Petkim reached 2,691.001 tons; the gross production of the Aliaga complex was 2,436,593 tons and 254,408 tons at the Yarimca complex.

In Turkey, 1.52 million tons of thermoplastics were consumed in 1999 and there has been an average 11% yearly increase in consumption in the last ten years. The consumption of thermoplastics is estimated to increase to 2.5 million tons in 2005.

The Turkish plastic processing industry owes its capability to its comparatively recent foundation. Recent developments and designs are applied in this young sector where the latest high technology from all over the world is brought. At present, in Turkey there are about 4000 plastic processing companies which are mainly small and medium scale and also about 67 companies with foreign investment.

Parellel to these developments in the plastic processing industry, the plastic processing machinery sector, a young but a strong sector, has been emerging in Turkey.

The main product groups in the Turkish plastic processing machinery are: injection-moulding machines, extruders and other moulding and forming machines. The majority of plastic processing machinery manufacturers are located in Istanbul and Izmir. Major sectors using plastic processing machines in Turkey are packaging, electro-electronics, household articles, construction materials and automotive parts industries.

Today, many Turkish machinery manufacturers have national and international certificates such as the Turkish standards (TSE), International quality standards (ISO 9001, ISO 9002). Turkish manufacturers follow European norms and standards in order to export to European countries. Those companies exporting to the European Union affixe the “CE Mark” if their products fall under the “New Approach” Directives.

EXPORT

Though the export figures of the plastic processing machinery are not remarkable at present, exports have an upward trend. Exports reached $ 12.1 million, with 37.5% growth in 2000. The main plastic processing machines exported are injection-moulding machines, extruders and other moulding and forming machines.

Turkish plastic processing machinery is exported to a wide range of countries in the world. Turkey is now exporting various plastic processing machinery to 73 countries throughout the world. The major markets for plastic processing machinery were Germany, Russia, Algeria, Spain and the United Kingdom in 2000. The leading export markets for injection-moulding machines were Germany, Algeria and Iran in 2000. In the same year, extruders exported to Esthonia, Russia, Germany and the United Kingdom.

Turkish plastic processing machinery is exhibited in international fairs and local fairs organised in Turkey. In 2002, two fairs, which are listed below, will be organised in the sector.

IPAF 2002 (5th Izmir International Plastic-Rubber Technologies and Products Fair) in Izmir in May.

Plastic and Rubber 2002 (12th Plastic Machinery and Materials, Mould, Plastic Products, Raw Materials, Plastic Packaging Technology, Rubber Technology and Products Fair) in Istanbul in October .

 Export Promotion Center of Turkey - IGEME, 2002 1
(Prepared by Tulay UYANIK

 

automatic key machine

automatic form fill seal packaging machines

bag fill and seal  machine

bending copper pipe

bending machinery pipe tube

blind rivet assemmbly machine

bottled water machine

brinell hardness tester

cheese packaging

cnc lathe

cnc machine shop

cnc machinery

cnc machining center

cnc milling machine

cnc vertical milling machine

fabric inspection systems

food and drug packaging

food packaging equipment

food packaging machine

forging press

fusion machine pipe

fusion seal pipe

fusion weld of polyethylene pipe

hardness tester

home page

hydraulic  Press

industrial rolled fabric inspection machines

injection molding  machine

injection moulding machine

key cutting machine

key machine

key making machine

overhead crane

 

overhead traveling crane

packaging machine for chemicals

pipe bending machine

pipe fusion polypropylene

plastic packaging machine

plastic bag machine

plastic bag making machine

plastic food packaging

plastic injection molding machine

plastic injection moulding machine

polyethylene packaging

poly pipe fusion tools

portable shrink wrap machines

portable hardness tester

rivet machine

rivet machine manufacturing company

rivet machines

rivet making machine

rivet setting machine

rocwell hardness tester

screen printing machine

shrink wrap machines

shrink wrap machine

shrink wrapping machines

table top vacuum packaging machine

tabletop shrink wrap machine

textile printing machine

thermoformer cheese packaging

vacuum packaging machines

vertical form fill seal machines for powders

vertical form fill seal machine

 


SOME BEAUTY FROM TURKEY

plastic injection molding machine

 
Side/Ancient Cities
Side, ancient Pamphylia's largest port, is situated on a small peninsula extending north-south into the sea.
plastic injection molding machineStrabo and Arrianos both record that Side was settled from Kyme, city in Aeolia, a region of western Anatolia. Most probably, this colonization occurred in the seventh century B.C. According to Arrianos, when settlers from Kyme came to Side, they could not understand the dialect. After a short while, the influence of this indigenous tongue was so great that the newcomers forgot their native Greek and started using the language of Side. Excavations have revealed several inscriptions written in this language. The inscriptions, dating from the third and second centuries B.C., remain undeciphered, but testify that the local language was still use several centuries after colonization. Another object found in Side excavations, a basalt column base from the seventh century B.C. and attributable to the Neo Hittites, provides other evidence of the site's early history. The word "side" is Anatolian in origin and means pomegranate.

::.. WE GUARANTEE OUR plastic injection molding machine

Next to no information exists concerning Side under Lydian and Persian sovereignty. Nevertheless, the fact that Side minted its own coins during the fifth century B.C. while under Persian dominion, shows that it still possessed a great measure of independence.

In 333 A.D., despite its strong land and sea walls, Side surrendered to Alexander the Great without a fight.

For a long period following the death of Alexander, Side came under the dominion of the Ptolemaic and Seleucid Empires, and in 190 B.C. witnessed a great naval battle. This encounter took place between the fleet of Rhodes, acting with the support of Rome and Pergamum, and the fleet of Antiochos III, the king of Syria, under the command of the famous Carthaginian Hannibal. Side took the side of Hannibal, but the Rhodian forces carried the day.

In the second century B.C. Side was able to stave off the forces of the Attaleids of Pergamum and preserve its independence, becoming a wealthy commercial, intellectual, and entertainment centre. Side's importance in the Eastern Mediterranean as an educational and cultural centre can be gauged by the fact that Antiochos VII, who ascended the throne of Syria in 138 B.C., was sent to Side in his youth to receive has education.

In the first century B.C. misfortune overtook Side in the form of Cilician pirates, who seized the city and turned it into a naval base and slave market. The people of Side seem to have tolerated the pirates because of the highly profitable nature of this commerce, which, however, gave the city a bad name in the region. Stratonicus, a man famous for his retorts and witticisms, answered the question, "Who are the worst, most treacherous people?" saying, "In Pamphylia the people of Phaselis, but in the whole world the people of Side". The famous Roman general Pompey ended the reign of the pirates in 67 b.C. and Side, by erecting monuments and statues in his honour, tried to erase its bad name.

Under Roman rule, Side prospered during a second golden age, especially in the second and third centuries when it became a metropolis ,seat of the provincial governor and his administrative staff. Due to its large harbour. Side in this era enjoyed commercial relations throughout the Mediterranean particularly with Egypt. Imported goods left Side for central Anatolia by road. Side's importance as a commercial centre can be ascertained by the hundreds of shops occupying not only the main streets, but also the narrowest of side streets and alleys. At the same time it continued as an important slave trading centre. Documents from the Imperial Roman period found in Egypt report that these slaves were sent to Side mainly from Africa. It is also known that Side possessed a large commercial fleet which did not pass up opportunities to commit piracy. Maritime commerce was the origin of the wealth of many merchants. These wealthy men did not work solely to increase their fortunes, but also provided for activities benefiting the people of the city, donating large sums to organize competitions and games, as well as to beautify the city and create social and religious organizations. One inscription found above a late period gate reports that two people, whose names cannot be made out, had a deipnisterion or soup kitchen erected for the use of government employees and the council of elders. A woman named Modesta organized gladiatorial events; Tuesianos, another inhabitant of Side, organized a feast to celebrate the return of the seamen to Side; and a husband and wife pair of philanthropists provided for the repairs of Side'' water system out of their own pockets. A great proportion of the buildings and monuments still standing at Side date to this magnificent epoch.

::.. CHOOSE OUR plastic injection molding machines , YOU WILL BE SATISFIED

Side's last years of plenty occurred in the fifth and sixth centuries A:D. when it served as the seat of the Bishopric of Eastern Pamphylia. At this time there was much consturction, and the city expanded beyond the extant city walls. Starting in the middle of the seventh century, destructive raids by Arab fleets on the southern coast of Anatolia transformed it into a war zone. Side was naturally, affected, and excavations have uncovered ashy burnt layers showing that the city was entirely burnt by Arabs.

According to the twelfth century Arab geographer Idrisi, Side was at one time a large and populous city, but after being sacked it was abandoned by its inhabitants, who moved to Antalya, two days' journey away; as a result, according to Idrisi, Side became known as Old Antalya.

In order to protect itself from threats coming by land or sea, Side was surrounded on all four sides by high walls. The sea walls have been much altered over the centuries due to repair and rebuilding and have most much of their original appearance; they have even collapsed in several places. By contrast, the land walls and their towers are almost whole, due to their having been carefully constructed of conglomerate stone. The city is entered through two gates in the eastern fortification wall. The large main gate was built during the Hellenistic period. It is flanked by two towers and gives onto a horseshoe-shaped courtyard. After passing through the courtyard and a square room, one enters the city. As is the case in Perge, the gate and courtyard complex were ornamented with many storeys of columns in the second century A.D. and transformed into a ceremonial place of honour. The second largest city gate, also belonging to the Hellenisitic period, lies on the north-east of the city; behind its square towers lies a courtyard that is also square in form.

The main street starts from this north-eastern gate and stretches all the way to the peninsula's western tip in an almost completely straight line. Along this street lay the city's principal official buildings and its squares. Excavations have revealed a perfectly planned sewer system. This system, covered with vaults, lay under the main street as well as the smaller streets.

Outside the city wall and opposite the main gate lies the nymphaeum, a monumental fountain consisting of a richly ornamented facade with three niches and with a fountain in front. Piped-in water used to flow from spouts in the middle of these niches.

The agora, the city's centre of commercial and cultural activity, lay along an arcaded street. It can be entered today from immediately opposite the museum. This square space was surrounded on all four sides by porticoes. Rows of stores can still be observed running behind the north-east and north-west porticoes. An interesting vaulted building lies in the agora's south-west corner adjacent to the theatre, this served as the city's latrium or public toilets and is the most highly ornamented and best preserved example in Anatolia. Sewers carried away the waste from this establishment, which had a 24-toilet capacity, while in front of the building ran a channel carrying only purified water.

In the middle of the agora lay a circular temple dedicated to Tyche (Fortune). All that is left today is the podium of this structure, but originally twelve columns ran around its exterior and the temple was topped by a pyramidal roof.

This agora was linked to a second, state agora by a street running along its southern edge. This agora, too, was square in plan and was enclosed by porticoes of lonic columns. It is believed that the high platform in the middle of the agora was used for the display and sale of slaves. Behind the eastern portico lay a large ornamented three-chambered building which, due to its architectural peculiarities, is thought to have been either an imperial palace or a library. From extant remains it can be ascertained that the building was originally two storeys and richly adorned with statues. Aside from a statue of Nemesis, which has been left in place to recall the original decorative style, all the statues found during excavation have been removed to the Side Museum.

The agora bathhouse, today used as the museum, is a five-room Byzantine structure dating to the fifth century A.D. It is entered through two arched doorways. The first room, possessing a small cold water pool, was the frigidarium. From here one passes to a stone-domed sweating room or lokonicum. The third and largest of the structure's rooms is the hot room or caldarium. The bath's heating system ran beneath the marble flooring. From the caldarium one can enter the two-room tepidarium or washing area through a narrow door. In front of the bath was a palaestra with a porticoed courtyard where men could excercise before bathing.

Next to the triumphal arch, which at a late date was used a city gate, lies a beautiful monument, partially restored in recent years. This monument consists of a niche between two aedicules and, according to an inscription found in the architrave, was built in 74 A.D. in memory of the Emperor Vespasion and his son Titus. During the construction of the late period city wall in the fourth century A.D., this monument was brought here from elsewhere in the city and turned into a fountain.

The theatre is the only extant example of its plan and construction type to be fount in Anatolia. It was erected in the second century A.D. on Hellenistic foundations. Because Side is virtually flat, the theatre's upper banks had to be built into the only natural rise available, which is not very steep, while the lower banks of seats overlay an arched substructure. Twenty nine seating levels can be counted below the 3.30 metre-wide diazoma, which divides the cavea in two. In the upper section only twenty two of the original twenty nine rows survive. Thus, this was Pamphylia's largest theatre and had a seating capacity of 16-17.000 people. In the outside gallery of the lower section, staircases rose to the diazoma. From interior galleries, staircases ascended to the theatre's upper section. The galleries' two ends probably contained paradoses, enabling them to be used as entrances for theatre staff and actors.

The orchestra was slightly larger than a semicircle, and at a late date it was surrounded by a nigh thick wall that rendered inoperative the lowest banks of seats. This wall was covered with waterproof pink plaster which allowed the orchestra to be filled from time to time with water for reenactments of naval battles and other sports; it no doubt also served as a pit for displays of wild animal combat. These displays usually pitted predatory animals against one another or against gladiators. Sometimes even unarmed people-criminals, slaves, and prisoners-were set against wild animals, and their helpless struggle was followed with rude glee.

A stage building rose off a wide podium behind the orchestra. It consisted of a two-storey facade 63 metres in length. On the podium, five narrow doors linked the orchestra ornamented with coloumns, niches and statues, and its lower storey contained five alrge openings allowing for the actors, and its entrance. Between these openings, just as in the theatre at Perge, were marble friezes illustrating Dionysiac themes. The stage building's reliefs have been transported to the agora for the duration of the restoration work which has newly begun is this area.

During the troubles of the fourth century A.D., a new fortification wall was built, and this wall took advantage of the high back wall of the stage building. During the fifth and sixth centuries A.D., the theatre was used as an open-air church, and the parados sections were decorated with floor mosaics and transformed into small chapels.

The most varied and beautiful temples in all of Pamphylia are to be found in Side. Two stupendous temples rose on the peninsula's southern point, right next to each other, the sea and the harbour. These temples were built in the second half of the second century A.D. Consisting entirely of marble, they are of the peripteros type and employ the Corinthian order. The short sides have six columns each, the long sides eleven. In the fifth century A.D. a large basilica was built in front of these temples, incorporating them into its atrium. Despite being heavily damaged, the temples' ancient configuration can be determined. Because Side's patron goddess was Athena, it is highly probable that one of the temples was dedicated to Athena, who in consequence, would have been featured extremely prominently as a protectress of the harbour and of sailors. As for the other temple, it must have been dedicated to Apollo. Restoration of the Temple of Apollo is ongoing.

Further on, to the east of the last big square off the arcaded street, lies a semicircular temple dedicated to the god Men. The cella of this temple was entered from the west by a staircase up the high podium. At the top of the stairs are four Corinthian columns. This temple dates to the end of the second century A.D.

Between the arcaded street and the theatre lie the remains of an early Roman temple. Of this temple, which is of the pseudo-peripteral type, only the podium remains. The podium remains is ascended from the north by seven steps. In front of the cella rise four granite Corinthian columns. Because of its proximity to the theatre, it is thought that this temple belonged to Dionysos.

Dating to the third century A.D., the biggest of Side's three public baths lies on the arcaded street. Its dimensions are 40x50 metres and it is a beautiful building in a fine state f preservation. Its various rooms are vaulted. The broad courtyard in front of this building was most likely used as a palaestra.

In order to satisfy their for a plentiful water supply, the people of Side went to almost superhuman lengths. Water from the head of the Melas river (today's Manavgat Çayı) reached Side after an adventuresome 30 kilometre journey on two-storeyed arched aqueducts, passing through channels carved out of cliffs, and vaulted tunnels and across valleys before it was collected in city cisterns, from which it was distributed in clay pipes.

Large cemeteries lie outside the city walls. In these cemeteries one can still see many types of graves, be they simple square holes, plain or carved sarcophagi, or magnificent memorials in the form of temples. These areas were called necropoli, cities of the dead. The most beautiful of these can be found in the western cemetery near the sea. On a podium reached by stairs rises a building shaped like a temple with four columns. Inside this building marble sarcophagi are situated in arched niches. This building dates to the second century A.D., and together with its ornamented courtyard must have served as the tomb of a wealthy family.

Side has been excavated by Turkish archaeologists since 1947, and excavations continue intermiltently.

::.. please do not hesitate to contact us about our  plastic injection molding  machine

 

For more information, please don't hesitate to contact us.

 

Google
Web www.qualitymachines.com